ACCIDENT PREVENTION AND RISK MANAGEMENT LESSON 7

ACCIDENT PREVENTION AND RISK MANAGEMENT

LESSON 7 SAFETY INSPECTION

¨  INTRODUCTION

¨  SELECTIVE SAFETY INSPECTION:

a)      TO GET TO THE SPOT DIRECTLY

b)      TO LOOK OBSERVE AND LEARN

c)       TO COPRRECT AS YOU INSPECT

d)      TO REPORT OR MAKE RECORDS CONSTRUCTIVELY

¨  INSPECTION POINTS:

¨  HOUSE KEEPING AND CLEANING

¨  MATERIALS HANDLING METHODS

¨  ADEQUACY OF WORKING SPACE VBETWEEN ARRANGEMENTS OF MACHINES

¨  GUARDING OF ROTATING REVOLVING AND TRANSMISSION MACHINERIES

¨  UPKEEP OF HAND TOOLS

¨  PROPER LOCATIONS OF LADDERS STEPS LIFTS HOISTS AND ELEVATORS

¨  QUALITY OF FLOORS PLATFORMS STAIRS AND RAILING

¨  ELECTRICAL EQUIPMENT AND THEIR OPERATING SWITCHES

¨  LIGTING AND VENTILATION FACILITY

¨  DUSTS FUMES GASES AND VAPOURS

¨  DANGEROUS LIKE ACIDS ANE XPLOSIVES LOCATIONS

¨  ACCESS TO OVERHEAD EQUIPMENT

¨  EXIT ROUTES

¨  LOACTION OF PRESSURE VESSELS AND COPMPRESSORS

¨  LOCATIONS OF FIRE FIGHTINGS  EXTINGUISHERS

¨  SIGN BORADS STICKERS AND OPERATINGS INSTRUCTIONS BOARD

¨  SAFE ELECTRICAL WIRINGS AND CONNECTION

¨  ANY OTHER CONDITIONS THAT LEAD TO HAZARDOUS CONDITIONS

¨  CHEMICALS PLANTS:

a)      SAFETY FROM ACIDS ALKALIS AND OTHER CHEMICALS LEAKS FROM PIPING EQUIPMENT

b)      RELEASE OF TOXIC GASES FUMES VAPOUR AND DUSTS

c)       HAZARDOUS SPLASHES SPILLAGES DURING HANDLING SERVICING MANUFACTURING OPERATION

d)      FIRE AND EXPLOSION HAZARDS

e)      ADEQUATE VENTILLATION BLOWERS EXHAUST DUCTS ABD VENTS

f)       NEED FOR PROTECTIVE ITEMS LIKE GASES MASKS GOGGLES GLOVES RESPIRATORS PROTECTIVE CLOTHING AND SHOES

g)      STORAGE OF CHEMICALS COOL AREAS AND PROTECTED AREAS SELECTION

h)      TRANSFERRING OF LIQUIDS BY SPILL PROOF PUMPS AND METHODS

i)        SPECIAL PRECAUTIONS FOR OXIDISING AND CORROSIVE CHEMICALS

j)        GROUNDINGS OF EQUIPMENT TO PREVENT STATIC ELECTRICITY ACCUMULATION

k)      USE OF COMPRESSED SIR FILLING VENTING AND IN AGITATING CHEMICALS

l)        LOCATIONS OF DRAINS AND STEAM TRAPS

m)    PILING OF DRUMS AND RACKING OF CONTAINERS

n)      STORAGE OPF COMBUSTIBLES SOLIDS AND CHEMICALS

o)      INSTALLATION OF FIRE FIGHTING EQUIPTMENT AND FIRE HYDRANTS

p)      ADEQUATE DISPLAY OF POSTERS SLOGANS WHERE CHEMICALS ARE STORED

q)      STORAGE OF INERT GASES LIKE CO2 AND N2

SAFETY INSPECTION REPORT:

a)      IS THE REPORT WRITTEN PAINLY AND CARRY FACTUAL INFORMATION?

b)      IS IT A CONSTRUCTIVE REPORT?

c)       DOES IT REPRESENT ALL OBSERVATION FAIRLY?

d)      WILL IT HELP TO PREVENT FUTURE ACCIDENT?

e)      IS PERSONNEL INVOLVED IN BRING DOWN THE DEGREE OF DEGREE OF HAZARDS PRASIED AND MERITED?

ADVANTAGES OF PLANT MAINTENANCE:

a)      REDUCED BREAKDOWN S AND DOWNTIME OF MACHINE AND LABOUR

b)      GREATER SAFETY FOR WORKERS

c)       LESS STAND BY OR RESERVE EQUIPMENT

d)      LOW MAINTENANCE AND REPAIRS COMPARED TO BREAK DOWN MAINTENANCE

e)      BETTER PRODUCT QUALTIY AND FEWER REJECTS

f)       INCREASED EQUIPTMENT

g)      BETTER INDUSTRILA MORALE AND INDUSTRRIAL RELATION BECAUSE PRODUCTION WORKERS DO NOT FACE LAY OFF OR LESS INCENTIVE BONUS DUE TO BREAK DOWNS

¨  COURSES:

Ø  Diploma in occupational Health And Safety

Ø  Diploma in industrial safety

Ø  Diploma in electrical safety

Ø  Diploma in fire fighting

Ø  Diploma in construction safety

Ø  Certificate in fire and safety engineering

Ø  Diploma in fire and safety engineering

Ø  PG diploma in fire and safety engineering

Ø  Certificate in oil  and Gas safety

Ø  Diploma in oil and Gas safety

Ø  Diploma in health ,safety and Environment

Ø  PG diploma in Health ,safety Environment

JOB PLACEMENT :

  NSA will give100% job placement assistance to all successful candidates. Some of the Industries are listed below.

     Oil Refineries, 

     Port trust,
   Airport,
   Chemical Industries,
   Insurance,
   Construction and
   service industries are main job providers.

  Students passed out from this institute can find job opportunities as Safety Supervisor, Safety Inspector, Safety Officer, Safety Manager, Fireman and Fire Officer.

CONTACT US:

 No. 714, 1st Floor, M.T.H Road, 

Mannurpet, Chennai – 600 050. 

+91 7667442300 

Ph: 26242038 ,26242318

Mobile No:8643055672

Website – http://safetyacademy.in/

 

Email : info@safetyacademy.in

ACCIDENT PREVENTION AND RISK MANAGEMENT

ACCIDENT PREVENTION AND RISK MANAGEMENT

LESSON 4 

SAFETY ORGANISATION

ž  INTRODUCTION

ž  SAFETY COMMITTEE

ž  POLICY MAKERS

ž  EXECUTIVES

ž  SUPERVISORY STAFF

ž  EMPLOYEES

ž  SAFETY ENFORCEMENT

ž  LINE ORGANIZATION

ž  SAFETY DEPARTMENT OR SAFETY ENGINEER

ž  SAFET TEAM:

a)      HEAD AND MEMBERS OF COMMITTEE

b)      EXTENT OF COMMITTEE AUTHORITY

c)       PROCEDURES REAGRDING TIME AND PLACE OF MEETING

d)      FREQUENCY OF MEETING

e)      ORDER OF BUSINESS

f)       RECORDS TO BE KEPT

g)      ATTENDANCE REQUIREMENT

LESSON 5

 SAFETY TRAINING

ž  INTRODUCTION

ž  TRAINING METHODS

ž  SAFETY EDUCATION AND TRAINING

ž  SAFETY EDUCATION

ž  SAFETY TRAINING:

a)      TEACHING ESSENTIALS OF SAFETY PRACTICES

b)      ORGAIZING SAFETY PROGRAMME

c)       APPRISING HUMAN PRACTICES

d)      FITTINGS NEW EMPLOYEE TO THE JOB

e)      DESIRE FOR MATERIALS KNOWLEDGE GAIN

f)       DESIRE FOR PRAISE DISTINCTION AROUSED

g)      FEAR OF RIDIOCULE OR DISAPPROVAL ERICATED

h)      SENSE OF HUMANITYRESPONSIBILTY LOYALITY MUST BE KINDLED

i)        MUST A SKILLED AND KEY MAN OF THE INDUSTRY

5. PLANT INSPECTIONS IN DETAIL
6. ACCIDENT INVESTIGATION
7. JOB SAFETY ANALYSIS
8. SAFETY SUGGESTION SYSTEM

ž  SAFETY TRAINING

ž  MEDIA FOR SAFETY EDUCATION AND TRAINING:

a)      FILM ON SAFETY

b)      POWER POINT PRESENTATION

c)       LECTURE BY SAFETY OFFICER ON SELECTED TOPIC

d)      LESSON BY KEY PERSONNEL

6. PLANT BULLETINS AND NEWS LETTER
7. SAFETY POSTERS AND SLOGANS
8. COMPETITIONS LIKE ESSAY AND QUIZ

ž  EMPLOYEE PARTICIPATION:

a)      WHERE IS THE NEAREST FIRE ALARM BOX?

b)      WHERE IS THE NEAREST STRETCHER?

c)       DO YOU WEAR SAFETY GOGGLES?

d)      DO YOU WEAR SAFETY BELT?

LESSON 6 

      MOTIVATION

INTRODUCTION

ž  MOTIVATION OF WORKERS:

a)      SAFE METHODS OF PERFORMING EACH JOB IS DEVELOPED AND DESCRIBED

b)      VARIOUS HAZARDOUS  POINTS AND METHODS ARE BROUGHT TO LIGHT AND DESCRIBED TO HIM.

c)       TELL HIM SHOW HIM AND GET HIM DO IT IN A SAFE WAY CORRECT HIM SUPERVISE HIM TO SEE THAT HE PRACTICES IT

d)      SAFETY GADGETS AND SAFEGUARDS ARE NECESSARILY MADE TO BE USED AND CORRECT USAGE TAUGHT TO HIM.

ž  HUMAN PSYCHOLOGY AND SAFETY:

a)      EMPLOYEE SELECTION AND PLACEMENT

b)      EMPLOYEE TRAINING

c)       ATTITUDE MORALE MOTIVATION

d)      MEASUREMENT OF HUMAN ABILITY

ž  INDUSTRIAL PSYCHOLOGY:

a)      IMPROVE THE MORALE AND ENTHUSIASM AT WORK

b)      TO RESTORE MENTAL HEALTH OF CONFUSED INDIVIDUALS

c)       TO REMOVE RISKS TO HEALTH OR THREATS TO SAFETY

d)      TO INCREASE EFFECIENCY AT WORK

e)      TO INCREASE LABOUR PRODUCTIVITY AND HENCE THE PROFIT

•       HIGH MORALE:

a)      DEDICATION TO WORK

b)      LOYALITY TO ORGANIZATION AND ITS LEADERSHIP

c)       GOOD DISCIPLINE ANMD CLOUNTARY COMPLIANCE TO RULES AND REGUL;ATIONS

d)      PRIDE IN THE ORGANIZATION

e)      TEAM SPIRIT

f)       RESISTANCE TO FRUSTATION

g)      HIGH DEGREE OF EMPLOYEE INTEREST IN THE JOB

ž  LOW MORALE:

a)      DEPRESSED STATE OF EMPLOYEES

b)      TOO MANY FOREMAN AND SUPERVISOR ARE REQUIRED

c)       HIGH RATE OF ABSENTEEISM AND LABOUR TURNOVER

d)      FRICTION AND FRUSTRATION AMONG WORKERS

e)      MORE COMPLAINTS

f)       ENMITY TOWARDS MANAGEMENT

g)      NEGLECT OF CONDITIONS  OF WORK

ž  PERSONAL FACTORS:

a)      AGE

b)      HEALTH CONDITIONS

c)       NUMBER OF DEPENDENTS

d)      FINANCIAL POSITION

e)      HOMKE ENVIRONMENT

f)       IMPROPER ATTITUDE TO WORK

g)      INCORRECT MACHINE OPERATIONS

h)      CARELESSNESS AND RECKLESS ATTITUDE

i)        FATIGUE

j)        EMOTIONAL INSTABILITY

k)      MENTAL WORRIES

l)        NON USE OF SAFETY DEVICES

m)    IMPROPER USE OF TOOLS

ž  CAUSES LEADING TO ACCIDENTS:

a)      POOR ATTENTION AND DAY DREAMING

b)      POOR EYESIGHT AND POOR HEARING3

c)       LACK OF STAMINA

d)      DISTASTE FOR THE JOB

e)      EMOTIONAL STRESSES AND EASILY GET PERTURBED

f)       DISLIKE OF SUPERVISOR FOREMAN MANAGER

g)      LACK OF SKILL TRAINING ON THE JOB

h)      INMSUFFICIENT TO HANDLE THE TYPES OF EORK

i)        UNSAFE BEHAVIOUR

j)        ADDICTION TO IN TOXICATING SUBSTANCES

ž  COURSES:

Ø  Diploma in occupational Health And Safety

Ø  Diploma in industrial safety

Ø  Diploma in electrical safety

Ø  Diploma in fire fighting

Ø  Diploma in construction safety

Ø  Certificate in fire and safety engineering

Ø  Diploma in fire and safety engineering

Ø  PG diploma in fire and safety engineering

Ø  Certificate in oil  and Gas safety

Ø  Diploma in oil and Gas safety

Ø  Diploma in health ,safety and Environment

Ø  PG diploma in Health ,safety Environment

JOB PLACEMENT :

ž  NSA will give100% job placement assistance to all successful candidates. Some of the Industries are listed below.

ž     Oil Refineries, 

ž     Port trust,
   Airport,
   Chemical Industries,
   Insurance,
   Construction and
   service industries are main job providers.

ž  Students passed out from this institute can find job opportunities as Safety Supervisor, Safety Inspector, Safety Officer, Safety Manager, Fireman and Fire Officer.

CONTACT US:

No. 714, 1st Floor, M.T.H Road,
Mannurpet, Chennai – 600 050.
+91 7667442300
Ph: 26242038 ,26242318

Mobile No:8643055672

Website – http://safetyacademy.in/

Email : info@safetyacademy.in

ACCIDENT PREVENTION AND RISK MANAGEMENT LESSION 3

ACCIDENT PREVENTION AND RISK MANAGEMENT

GAS CYLINDERSACCIDENT PREVENTION AND RISK MANAGEMENT

LESSON 3 EXPLOSIVES

INTRODUCTION

a)      CHEMICAL ENERGY SUCH AS NITROGLYCERINE OR GRAIN DUST

b)      PRESSURIZED COMPRESSED GAS SUCH AS GAS CYLINDERS OR AEROSOL

c)       NUCLEAR SUCH AS FISSILE ISOTOPES OF URANIUM 235 AND PLUTONIUM 239

d)      EXPLOSIVE CHEMICALS

e)      PRIMARY EXPLOSIVES

f)       HIGH EXPLOSIVES

g)      TERTIARY EXPLOSIVES

h)      LOW EXPLOSIVES

i)        EXPLOSIVE CHARACTER

j)        CHEMICAL REACTION

k)      DECOMPOSITION

l)        DEFLAGRATION

m)    DETONATION

n)      EXOTIC

o)      PROPERTIES OF EXPLOSIVE MATERIALS

p)      AVAILABILITY AND COST

q)      SENTIVITY

r)       IMPACT

s)       FRICTION

t)       HEAT

u)      VELOCITY OF DETONATION

v)      VOLATILITY

w)    STABILITY

x)      ELECTROMAGNETIC RADIATION

y)      MINE EXPLOSION

COURSES:

Ø  Diploma in occupational Health And Safety

Ø  Diploma in industrial safety

Ø  Diploma in electrical safety

Ø  Diploma in fire fighting

Ø  Diploma in construction safety

Ø  Certificate in fire and safety engineering

Ø  Diploma in fire and safety engineering

Ø  PG diploma in fire and safety engineering

Ø  Certificate in oil  and Gas safety

Ø  Diploma in oil and Gas safety

Ø  Diploma in health ,safety and Environment

Ø  PG diploma in Health ,safety Environment

JOB PLACEMENT :

NSA will give100% job placement assistance to all successful candidates. Some of the Industries are listed below.

   Oil Refineries, 

   Port trust,
   Airport,
   Chemical Industries,
   Insurance,
   Construction and
   service industries are main job providers.

Students passed out from this institute can find job opportunities as Safety Supervisor, Safety Inspector, Safety Officer, Safety Manager, Fireman and Fire Officer.

CONTACT US:

No. 714, 1st Floor, M.T.H Road,
Mannurpet, Chennai – 600 050.
+91 7667442300
Ph: 26242038 ,26242318

Mobile No:8643055672

Website – http://safetyacademy.in/

Email : info@safetyacademy.in

ACCIDENT PREVENTION AND RISK MANAGEMENT UNIT - 2

ACCIDENT PREVENTION AND RISK MANAGEMENT

LESSON 2

GAS CYLINDERS

INTRODUCTION

PRESSURE

HIGH PRESSURE USAGES

PRODUCTION/MAINTENANCE OF A LIQUID

STORAGE OF GASES

COMPRESSION OF SOLIDS

SEPERATION OF LIQUIDS FROM SOLIDS

INCREASING GAS SOLUBILITY IN LIQUIDS

INCREASE OF CHEMICALS REACTION RATES

SHIFTING CHEMICALS EQUIPTMENTS

AUTOCLAVES

GAS CYLINDERS

OXYGEN CYLINDERS

ACETYLENE CYLINDERS

HYDROGEN CYLINDERS

HIGH PRESSURE MATERIALS SELECTION:

a)      WORKING PRESSURE

b)      WORKING TEMPERATURE

c)       SIZE OF VESSEL

d)      CORROSION ASPECT OF THE PROCESS

e)      STRESS CONDITIONS TO BE CONSIDERED

f)       LOCAL ENVIRONMENT CONDITIONS

g)      THE STRENGHT OF MATERIALS

a)      YIELD STRENGHT

b)      PLASTIC DEFORMATION ANMD DUCTILITY

c)       FRACTURE STRENGTH OR TOUGHNESSS

d)      HIGH TEMEPRATURE STRENGTH

STANDARD OPERATING PROCEDURES:

a)      PRESSURE GAUGES LIKE BOURDON TYPE SHOULD BE INSTALLED ABOVE EYE LEVEL TYPE SHOULD NEVER BE ALLOWED TO COORRODE TWO RAPID RISE OF PRESSURE OF FALLL OF PRESSURE MUST BE AVOIDED.

b)      FLAMMABLE GASES AT HIGH PRESURE ON RUBBING AGAINST WALL OF METALLIC PIPES WILL CAUSE STATIC ELECTRICITY DISCHARGE GOOD EARTHING IS ESSENTIAL ON THESE PIPE LINES

c)       DIRECT FIRED VESSELS SHOULD NOT BE EMPTIED SUDDENLT THEY ARE ALOWLY COOLED BY THE FLUID RUNNING IN SLOW VELOCITIES

d)      BURSTING OF RUPTURE DISC HAPPENS WHEN VESELS CAUSE SUDDEN HIGH TEMPERATURES WHICH MAY IGNITE FLAMMABLE GASES SUFFICIENT VENTING HEIGHT IS NECESSARY FOR SAFE PASSAGE OF ESCAPED GASES

e)      TWO SAFETY VALUES ONE OPEARTING AT SLIGHTLY LOWER PRESSURE IS ADVANTAGEOUS IN VERY HIGH PRESSURE EQUIPTMENT

f)       RUPTURE DISCS HOWEVER GOOD SHOULD BE FREQUENTLY CHECKED AND CHANGED THEY GET HARDENED AND MAY FAIL TO RUPTURE WHEN PRESSURE EXCEEDS NORMAL OPERATING PRESSURE CORROSION OF INNER SIDE MUST BE FREQUENTLY CHECKED

g)      A RUPTURE DISC IS NORMALLY FITTED TO RELEIVE AT ABOUT 1.5 TIMES THE WORKING PRESSURE IT MAY BE EVEN 1.3 DEPENDING UPON THE CONDITION OF OPERATIONS.

h)      CARBON MONOXIDE ATTACK SEVERLY NICKEL SIMILARLY MERCURY ATTACK COPPER AND BRASSES IT MAY ATTACK STEEL AT HIGH PRESSURE HENCE THESE SITUATION MUST BE AVOIDED.

i)        ANY LEAK DEVELOPED MAY CAUSE FIRE OR EXPLOSION HENCE THEY MUST BE REPAIRED QUICKLY BY SLOW RELEASE OF PRESSURE FIRST AND THEN REPAIRS CARRIED OUT.

HIGH PRESSURE EQUIPTMENT MUST BE CONFINED IN SPECIAL ROOMS HAVING THICK WALLS OR BARRICADES THE HIGH PRESSURE GASES MUST BE QUICKLY VENTILATED TO THE TOP MOST POINT OF BUILDING

11. WELDED EQUIPTMENT OPERATED AT LOW TEMPERATURES AT LOW TEMPERATURES BELOW ZERO TEMPEARTURES SHOULD BE HEAT TREATED TO RELEIVE LOCKED UP STRESSES EXPERT WELDESR SHOULD BE ENGAGED TO FREQUENT RADIOLOGY TESTS OF THESE EQUIPTMENT MUST BE CARRIED OUT FOR ANY POSSIBLE CRACKS DEVELOPED DURING OPERATION
12. OILS SHOULD NEVER BE USED AS LUBRICANT WHEN OXYGEN IS COMPRESSED AIR LINES SHOULD NOT BE USED FOR CARRYING OXYGEN
13. PRESSURE JOINTS SHOULD NOT BE TIGHTENED UNDER PRESSURE
14. REGULAR INSPECTION HYDRAULIC TESTING AT 1.5 TIMES THE QORKING PRESSURE SHOULD BE CARRIED OUT BY EXPERIENCED STAFF PERSONALLY
15. TOO RAPID RISE IN EITHER PRESSURE OR TEMPEARTURE SHOULD BE AVOIDED LARGE TEMPERATURE GRADIENTS IN THE WALLS OF THE VESSELS LEAD TO HIGH STRESSES
16. SAFETY VALVES AND RUPTURE DISCS SHOULD BE PIPED TO DICHARGE AT A PLACE WHERE IT CAN CAUSE NO HARM THE DISCHARGE LINE MUST HAVE SUFFICIENT DIAMETER TO CARRY THE EXCESS LOAD RELEASE.
17. IT IS OFTEN ADVISABLE TO HAVE MORE THAN ONE PERSON WORKING IN THE HIGH PRESSURE ZONE TOO MANY PERSONS ALSO MUST BE AVOIDED
18. GAS STORAGE SYSTEMS MUST NEVER BE ALLOWED TO MIX ANALYSIS SHOULD BE CHECKED FREQUENTLY
19. SAND DIKES SANDY FLOOR MUST BE HAD SURROUNDING THE FLAMMABLE LIQUID STORAGE TANKS
20. ALL HIGH PRESSURE AREAS SHOULDBE CLEARLY MARKED ANMD GUARDED AGAINST UNAUTHORIZED ENTRY.

LESSON 3 EXPLOSIVES

INTRODUCTION

a)      CHEMICAL ENERGY SUCH AS NITROGLYCERINE OR GRAIN DUST

b)      PRESSURIZED COMPRESSED GAS SUCH AS GAS CYLINDERS OR AEROSOL

c)       NUCLEAR SUCH AS FISSILE ISOTOPES OF URANIUM 235 AND PLUTONIUM 239

d)      EXPLOSIVE CHEMICALS

e)      PRIMARY EXPLOSIVES

f)       HIGH EXPLOSIVES

g)      TERTIARY EXPLOSIVES

h)      LOW EXPLOSIVES

i)        EXPLOSIVE CHARACTER

j)        CHEMICAL REACTION

k)      DECOMPOSITION

l)        DEFLAGRATION

m)    DETONATION

n)      EXOTIC

o)      PROPERTIES OF EXPLOSIVE MATERIALS

p)      AVAILABILITY AND COST

q)      SENTIVITY

r)       IMPACT

s)       FRICTION

t)       HEAT

u)      VELOCITY OF DETONATION

v)      VOLATILITY

w)     STABILITY

x)      ELECTROMAGNETIC RADIATION

y)      MINE EXPLOSION

COURSES:

Ø  Diploma in occupational Health And Safety

Ø  Diploma in industrial safety

Ø  Diploma in electrical safety

Ø  Diploma in fire fighting

Ø  Diploma in construction safety

Ø  Certificate in fire and safety engineering

Ø  Diploma in fire and safety engineering

Ø  PG diploma in fire and safety engineering

Ø  Certificate in oil  and Gas safety

Ø  Diploma in oil and Gas safety

Ø  Diploma in health ,safety and Environment

Ø  PG diploma in Health ,safety Environment

JOB PLACEMENT :

NSA will give100% job placement assistance to all successful candidates. Some of the Industries are listed below.

   Oil Refineries, 

   Port trust,
   Airport,
   Chemical Industries,
   Insurance,
   Construction and
   service industries are main job providers.

Students passed out from this institute can find job opportunities as Safety Supervisor, Safety Inspector, Safety Officer, Safety Manager, Fireman and Fire Officer.

CONTACT US:

No. 714, 1st Floor, M.T.H Road,
Mannurpet, Chennai – 600 050.
+91 7667442300
Ph: 26242038 ,26242318

Mobile No:8643055672

Website – http://safetyacademy.in/

Email : info@safetyacademy.in